German Standard Filter Plate 800-2000 Series High Pressure PP Membrane Plate Filter Press for Sewage Treatment and Sludge Dewatering

Product Description

The product description

All series from 800mmX800mm to 2000mmX2000mm

The diaphragm filter plate is composed of two diaphragms and a core plate. External media (such as water or compressed air) is introduced into the chamber between the core plate and the membrane, causing the membrane to bulge and compressing the filter chamber composed of the diaphragm filter plate and the box filter plate, thereby better separating and improving the solid content. The diaphragm is an active component, and repeated movement can easily cause deformation and damage to the diaphragm.The rubber diaphragm plate is a diaphragm plate composed of a core plate and two rubber diaphragms that are embedded and pressed together. Mainly after pressure filtration, the rubber diaphragm filter plate diaphragm is generally embedded in the groove of the core plate, making it easy to disassemble and replace because the rubber diaphragm has high elasticity and is not easily damaged. It can significantly improve the solid content and sealing performance of the filter cake, shorten the filtration time, and significantly improve production efficiency.



Product display

 

 

Filter cloth workshop

Our Advantages

1. Good chemical resistance, wide temperature range (-10~90 ºC), excellent fatigue life, and high-temperature steam sterilization resistance.
2. Excellent chemical stability, with filter materials containing certain acidity, alkalinity, and temperature, the service life can be increased by at least 50%.
3. The hydrophobicity of the polypropylene filter plate material ensures a 45% increase in drainage efficiency during the filtration process.
4. Our polypropylene diaphragm filter plate can achieve a pressing pressure of 1.6MPa, which is far superior to rubber filter plates and also better than peers.
5. Low pressure filtration, medium and low pressure washing, and high pressure pressing. Greatly reduce washing water and improve the washing effect. Shorten the entire filtration cycle and increase the solid content of the filter cake to over 99%.
6. The pressing medium can be fluid media such as air, inert gas, water, oil, etc., which can meet the needs of different industries.
7. The pressing pressure can reach up to MPA, and it is equipped with a pressing safety protection system to avoid damage to the diaphragm caused by misoperation.
8. The lighter weight of the filter plate makes the handling of the filter components easier.

Specifications
 

Feeding	Model	Plate Thickness (mm)	board thick (mm)	advance material Kong footpath (mm)	advance material mouth thick(mm)	water wash Kong footpath (mm)	Permissible at different feed temperatures Maximum feed pressure MPa				bushing standard allocation	Open flow Polypropylene Alkene Faucet	Liner intake connector clip	Septum membrane Clip material quality	Pressing method
							Feed pressure MPa		Pressing pressure MPa
							≤50ºC	≤80ºC	≤50ºC	≤80ºC
G rubber diaphragm filter plate - double-sided embedding
In the material	G400 diaphragm plate	25	60	52	52	20	0.6	0.4	0.8	0.6	PP	1/2	3/4	304	Pneumatic press
	X400 filter plate	25	50	62	20	20	0.6	0.4	0.8	0.6
In the material	G800 diaphragm plate	30	65	75	45	50	0.6	0.4	0.8	0.6	PP	1/2	3/4	PP	Pneumatic press
					(35)									304
	X800 filter plate	30	60	90	30	50	0.6	0.4	0.8	0.6		1/2
In the material	G1000 diaphragm plate	30	65	100	41	50	0.6	0.4	0.8	0.6	PP	1/2	3/4	PP	Pneumatic press
					(35)									304
	X1000 filter plate	30	60	100	30	50	0.6	0.4	0.8	0.6		1/2
In the material	G1250 diaphragm plate	30	70	130	44	65	0.6	0.4	0.8	0.6	PP	1/2	3/4	PP	Pneumatic press
					(35)									304
	X1250 filter plate	30	60	130	30	65	0.6	0.4	0.8	0.6		1/2
In the material	G1500 diaphragm plate	35	75	150	39	80	0.6	0.4	0.8	0.6	PP	1/2	3/4	PP	Pneumatic press
					(35)									304
	X1500 filter plate	35	70	150	30	80	0.6	0.4	0.8	0.6		1/2
G rubber diaphragm filter plate - single side embedded
In the material	G1250 composite diaphragm plate	30	70	130	45	65	0.6	0.4	0.8	0.6	PP	1/2	3/8	PP	Pneumatic press
					(41)									-304
		35	75		45
					(35)									304
In the material	G1500 composite diaphragm plate	35	75	150	45	80	0.6	0.4	0.8	0.6	PP	1/2	3/8	PP	Pneumatic press
					(41)									304
		30	70	150	45	80	0.6	0.4	0.8	0.6	PP	1/2	3/8	PP	Pneumatic press
					(41)									304
In the material	G630*450	30	70				1		0.6					304	Pneumatic press
	G1500*1000	40	80				1		0.6					304	Pneumatic press
	G2000*1500	42	93	100		100	1		0.6					304	Pneumatic press

Related Products

 

 

 

 

 
About us
 

Zhejiang Fujie Environmental Protection Equipment Co., Ltd., established in June 2016, is a wholly-owned subsidiary of Shanghai Fujie.

The company has 60000KN, 80000KN, and 120000KN ultra large injection and pressure equipments, with the largest tonnage of oil pressure machines in the industry and multiple three axis machining centers and several five axis machining centers, making it the first enterprise in the industry to use five axis machining.

The unique raw materials and formulas for filter plate manufacturing ensure various performance indicators and mechanical strength. The company has passed three major management system certifications: ISO9001, ISO14000, and OHSA45001.

 

 

Largest tonnage of oil pressure machines in the industry
 

Five axis machiningcenter
(first one to use in the industry)