Automatic High Pressure Membrane Filter Press with Platform for Sludge Dewatering Treatment and Wastewater Treatment

• Customization: Available
• Structure: Cantilever Beam Type
• Filter Material: PP
• Pressure: Auto Hydraulic
• Type: Diaphragm Filter Press
• Feature1: Wholly Automatic
• Feature2: Auto Plate Shifting
• Feature3: Automatic Reverse Turning Plate
• Feature4: Membrane Expression
• Expression Medium: High Pressure Air
• Cake Thickness: 30\35\40
• Feed: Feeding From Both Ends
• Filtration Area: 10-1000m²
• Chamber Volume: 0.1-20m³
• Filter Pressure: 0.5-1.6MPa
• Expression Pressure: 0.6-2.0MPa
• Washing Pressure: 4-5 MPa
• Motor Power: 5.5-26kw
• Plate Qty: 9-147
• Filtrate Delivery: Open\Close
• Transport Package: Wood Case/Container (Other Seaworthy)
• Specification: 800-1500
• Trademark: FUJIE
• Origin: Zhejiang China

Product Description

Product Introduction

High pressure membrane filter press manufactured by FUJIE. Full automation machine with cloth washing,membrane expression equipment,It can perform second press with high pressure air, significantly lower residual cake moisture and improves the efficiency.
 

Product Advantages

1. Simple structure and safe operation

2. High degree of automation

3. Strong adaptability to materials

4. High filtration pressure

5. Low moisture content of filter cake

6. High solid-phase recovery rate

7. Few faults and convenient maintenance

8. Large processing capacity

9. Energy conservation and environmental protection

10. Long service life
 

Product display

Parts&Assemblings

 

 

 

Features

1.Low pressure filtration, medium pressure washing, and high pressure pressing. With that can greatly shorten the entire filtration cycle.

2.Filter pressure can reach 2.5Mpa max so that can greatly lower the residual cake moisture.

3.At later stage of the filtration, it takes less labor cost because of small flow and high pressure.

4.Membrane expression which performs second squeezing by high pressure air in a moment. Significantly efficient and perfectly anti-leakage.

5.Significantly anti-corrosion, basically can cope with any solid liquid separation.

 

6.High automation machine configured with PLC system and human-machine interface control which can realize unmanned operation.

 

7.Specially designed plate which make filter chamber changeable. Now it is successfully applied into sludge dewatering in WWTPs. Adopting an integral fusion welding structure of reinforced polypropylene lining plate and rubber plastic elastomer membrane, it is remarkably resistant to chemicals and fatigue.

 

8.Filter cloth regenerates quickly. With fully automatic system it can realize semi-continuous operation.

 

Cases
 

Covers over 2000 m²
  

Specification
 

Model	Pressure (Mpa)	Filter area (m^2)	Plate size(mm)	Feeding	Cake thickness (mm)	Chamber volume (m³)	Cylinder diameter (mm)	Cylinder stroke (mm)	Plate QTY	Motor power (KW)	Dimensions (mm) L*W*H
G800	0.5-1.6 (Filtration) 0.6-2.0 (Expression) 4-5 (Washing)	10-40	800X800	Feeding from both ends	30	0.1-0.6	250	550	9-39	5.5	(4000-6000) X2300X3000
40-100		1000X1000	G1000		30	0.6-1.4	320	750	25-61	9	(6000-8500) X2500X3500
100-220		1250X1250	G1250		35	1.7-3.6	380	750	39-85	9	(7000-11000) X2700X4000
200-500		1500X1500	G1500		35	3.5-8.1	380X2	750	51-125	15	(9000-15000) X3500X5000
400-1000		2000X2000	G2000		40	7.7-20	380X2	1250	57-147	26	(11000-18000) X4000X6000

Remarks: 1.Parameter differs in each model because of various requirements (high temperature ,chemical resistance)
                 2.Customization available.
                 3.Please contact us for any further information



Related Products

 

 

Packing & Shipping



Service  
                                                           
  Pre-sale service:
  1. Your inquiry will be replied within 12 hours.
  2. Help you to select suitable model
  3. Design totally according to your requirements
 
  After-sale service:
  1. Provide 12 months warranty period and you will have our technology support forever
  2. Engineering available to offer the service to your machinery overseas


FAQ  
                                                                  
   Q: Can you provide us the detailed drawing?
   A:Yes, we can provide you the drawing after have made the prepayment.

   Q: Are you a manufacturer or a trader?
   A:We're a professional and experienced manufacturer located in HangZhou.

   Q: Can you accept OEM?
   A:Yes, we can produce the machinery totally according to your design standard.

   Q: How about the delivery time?
   A:Normally 10-20 working days after prepayment, and we promise we will make the delivery as soon as we can.

   Q: How about the production capacity of your company?
   A: Our factory covers area over 20,000M2 and produces machines 5000 sets per year.

   Q: How could we trust you and your company? This is first time transaction?

   Q: What about the package of your export product?
   A: We use anticorrosion wooden case with foam inside.

   Q: What kind of payment do you accept?
   A: T/T, L/C,WESTERN UNIION, MONEYGRAM

   Q: What kind of transportation do you offer?
   A: Customers decide freight mode, Air, Land & Sea .
 

About us

Zhejiang Fujie Environmental Protection Equipment Co., Ltd., established in June 2016, is a wholly-owned subsidiary of Shanghai Fujie.

The company has 60000KN, 80000KN, and 120000KN ultra large injection and pressure equipments, with the largest tonnage of oil pressure machines in the industry and multiple three axis machining centers and several five axis machining centers, making it the first enterprise in the industry to use five axis machining.

The unique raw materials and formulas for filter plate manufacturing ensure various performance indicators and mechanical strength. The company has passed three major management system certifications: ISO9001, ISO14000, and OHSA45001.

 

Largest tonnage of oil pressure machines in the industry

Five axis machiningcenter
(first one to use in the industry)